Dunking Biscuit Snow Foam Lance


Quick Overview

This high quality foam lance connects to your Karcher K-Series or Nilfisk (Domestic) pressure washers and combines pressurised water with our Velvet Ultra Snow Foam product to create an amazing ‘snow foam’ effect.

  • Superior quality
  • Adjustable spray pattern
  • Adjustable flow rate – controls dilution product/water ratio, affecting foam thickness
  • Chemically resistant construction
  • Brass body, heavy duty nylon coverings and high density polyethylene
  • 1 litre capacity



SKU N/A Categories ,


Snow Foam is a vital pre-wash step, as such, applying it requires a foam lance that will perform time and time again. Our Foam Lance is made from durable high density polyethylene. When used with Velvet, our Ultra Snow Foam, it will provide a super thick, ultra concentrated pre-wash foam providing a revolutionary ‘active lift’ cleaning method.



Additional information

Weight .640 kg
Dimensions 12 × 9.5 × 23.5 cm

Nilfisk Straight, Nilfisk Round, Karcher, Lavor


25mls in 1l lance


1. Screw your chosen adapter on to the brass body. Ensure there is adequate PTFE tape on the thread before screwing the adapter on. Not using PTFE tape will cause leaks and air leaks affecting the usability of the snow foam lance.
2. Attach the pick up tube on to the brass body inlet port.
3. Fill up the 1 litre bottle with plain water and run it through your pressure washer. Check for leaks and check the lance is working correctly.
4. Once you are satisfied there are no leaks and the lance is functioning correctly, add 25ml of Velvet Ultra snow foam in the bottle and top up the remainder of the 1 litre lance with fresh cold water.
5. After every use you must follow through with plain water for 30 seconds to flush out any snow foam cleaner, if left, the mesh filter can become scaled and blocked.


There are no reviews yet.

Be the first to review “Dunking Biscuit Snow Foam Lance”