Ultimate Decontamination Kit

£35.45

Quick Overview

Looking to perform a deep and thorough decontamination? look no further than our Ultimate Decontamination Kit.

Containing everything you need to ensure a full decontamination this kit has you covered.

  • Melt is an advanced formulation of Iron remover that removes ferrous metal contamination from your vehicles surface.
  • Purge is an advanced spray able gel designed specifically for the removal of Tar and sticky residues.
  • Lööb is a water based clay lubricant that provides exceptional slip characteristics to aid in the claying process.
£9.95
£9.95

In stock

£7.95

In stock

SKU ULTDECON100 Categories ,

Description

Melt is an advanced formulation of Iron remover that removes ferrous metal contamination from your vehicles surface. Our powerful PH neutral formulation is safe to use on all wheel types, metals and plastics.

Melt has a shear thinning rheology which enables the product to thicken once applied. Melt clings to the surface like a gel to safely loosen and dissolve ferrous metal particles, dirt and grime.

Melt gives Exceptional powerful cleaning whilst maintaining the integrity of any wax or sealant layers and is pre-diluted in a spray bottle simple and easy to use.

Purge is an advanced spray able gel designed specifically for the removal of Tar and sticky residues.

Engineered to be safer than existing Tar and sticky stuff removers, Purge allows for longer dwell times compared to traditional products out there, allowing the product to target Tar and Sticky stuff for longer due to its gel like consistency rather than simply evaporating or dripping off.

Lööb is a water based clay lubricant that provides exceptional slip characteristics to aid in the claying process. Lubricating the clay bar extends its lifetime and makes it go further. In addition, lubrication minimises the abrasive effect of clay, decreasing the potential amount of damage during the claying process.

Additional information

Weight 1.8 kg
Gloves Required

Yes

Dilution

No Dilution Required

Method

Purge

DO NOT use Purge on areas which have had smart repairs or which have NOT been professionally painted.

If unsure, test on an inconspicuous area first.

  1. Spray the solution onto the surface while it is dry and allow to dwell.
  2. Rinse the solution thoroughly using a pressure washer.

 

Melt

Do not use in direct sunlight or on surfaces that are high in temperature. Wear the gloves provided

1. Spray Melt onto the required surface generously.
2. Allow to work for a maximum of 5 minutes ensuring the solution does not dry.
3. Rinse the area thoroughly using a pressure washer.

 

Lööb

1. Spray Lööb liberally onto the panel before the clay bar makes contact and ensure the area does not dry.
2. Work the clay bar back and forth in one direction, using light pressure avoid circular motions. As the clay bar glides over the surface contamination of the surface should be felt or even heard.
3. Ensure the clay is folded/kneaded regularly, and ensure the clay is constantly checked for debris which may potentially damage the surface.

Reviews

There are no reviews yet.

Be the first to review “Ultimate Decontamination Kit”